Crowding Tubs

• Full 180 degree, 1/4 tub or 45 degree
• Only full has side exit
• Left hand or right hand
• Switching gate
• Catwalks
• 10 ft radius
• 5 ft 5 inches high
• 16 Gauge sheet metal sides
• Four 7 ft upright posts - 2 1/2 inch tube
• Positive latch
• 2 Inch steel tubing side frames
• Outside entrance gate
• 4 Inch Pivot post
• Weight 1480 lbs

Alley

The alleyways are made in 8 feet sections as straight units, or as left or right curves. The sides are tapered at the bottom and adjust from 27 inches at the top and 19 inches at the bottom to 17 inches at the top and 9 inches at the bottom. These units are easy and fast to assemble for use in more than one location. The 2 inch and 2 1/2 inch tubular steel gives strength and durability. Side panels are of 48 inch x 16 gauge sheet metal.

• Left hand, right hand or straight
• Stops
• Catwalks
• Each section 8 feet in length
• Width 38 inches
• Height 6 feet

Filson Full Tub 100 System

• One automatic heavy-duty chute
• One palpation cage
• One 24ft crowding alley with stop
• One switch gate
• One full tub
• Twenty two 12ft fence panels
• Three 10ft fence panels
• Two regular 10ft panels
• Two 10ft alley spreaders
• Three 12ft bow gates
• Two 12ft panels with 4ft gate
• One 4ft gate
• Seventeen 2-way posts & pads
• One corner post & pad
• One 10ft bow gate